Recumbent Bike and Trike Accessories

Do you have a 2 inch hitch receiver and two tadpole trikes to transport? This is the rack for you! This easy-to-use hitch-mount recumbent trike carrying rack carries one or two tadpole trikes, or a bike and a trike. Carrying arms adjust to fit many different types of bikes and trikes, plus the cinch straps adapt to many frame configurations. Alpaca Two Tadpole Carrier will carry two tadpole trikes. Fits a 2 inch hitch receiver.

Arkel's Recumbent Seat Bag features durable Cordura construction and is loaded with great Arkel features such as a flag pole sleeve, water bladder pocket, and hose port hole. Plus, it has exterior compression straps to stabilize your gear and accommodate variable seat widths while dual carry handles let you tote it along on off-bike adventures, too.

A convertible pannier backpack designed to carry your gear on a daily commute by bike or on the foot, the Arkel Bugeasily converts in seconds. The shoulder straps tuck away in a stow pocket while on the bike. - Ergonomic backpack convertible bike pannier - Equipped with an ultra-solid Cam-Lock attachment system - Helmet Holder Flap - U-Lock Storage - Side Mesh Pockets for water (or wine) bottles - Ultra strong Cordura fabric 1000D - Made in Canada - Padded back for comfort - Water repellent (add a rain cover to make it 100% waterproof) - Reflective logos on all sides to be visible at all times Weight: 1.2 kg (2.6 lbs) Volume: 25 L (1 650 cu. in.) Arkel bags are very well made, and could last for years with proper care.

Atoc's unique pivoting system works with tandems, recumbent bikes, and single bikes, and allows: Easy one person loading (even for a small person) Fast - takes less than one minute No greasy chains to reach around No heavy or awkward lifting--You never lift more than 1/2 your tandem's weight Tandem Topper stabilizes the tandem for you while loading and unloading No contact points to damage your tandem's finish Fits most roof rail systems: Yakima and Thule compatible mounting clips come standard. Works with most vehicles - small, large, short, or tall. It needs a mere 22" minimum load bar spacing Only 5 1/2" wide ... which means you can carry lots of bikes (or other stuff) Tandem Topper's unique design protects your vehicle and bike from dents and scratches. Tandem Topper's rear section easily disconnects, allowing your hatchback to fully open ... without damage. The DV comes with extra long wheel tray (82" max. wheelbase). A breeze to install!

This replacement pad fits on the brackets already installed on newer Catrike recumbent trikes. Need a set? Order two.

Plastic flag holder fits Catrike recumbent trikes and holds the flag securely in place while you ride.

Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.

If the foam on the back of the seat cushion (upper) or the seat (lower) on your late-model Catrike Villager, Trail, Road, Dumont, or 559 needs replacement, this is what you want. Select either one part or both. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.

If the mesh base of the seat on your late-model Catrike Villager, Trail, Road, Dumont, or 559 is damaged, this is the replacement. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.

Adjustable, padded and lightweight, this neck rest adds comfort to your Catrike recumbent trike, especially if your seat is reclined.

This is a must if you plan to share your Catrike with other riders. Installing a Catrike chain tensioner will allow you to adjust the boom to fit multiple riders without adjusting the chain length each time.

This set includes an upper and lower seat foam and a seat foam cover to create an upgrade for older Catrike models or replacement seat pad for Catrike recumbent trikes, especially newer models of the Villager, Trail, Road, Dumont, or 559. Replacement seat foam, the seat foam cover, and the mesh seat are all available separately as well, if you just need one replacement part.

Adding an electric assist to your Catrike recumbent trike is easy with the e-Cat electric motor kit upgrade. In combination with a Catrike Dumont, 5.5.9, Expedition, Trail, Pocket or Villager, these systems offer excellent efficiency, comfort and riding enjoyment. The efficient and versatile Bosch Active Line Plus system features smooth, gentle acceleration, and four levels of assistance: Eco, Tour, Sport, and Turbo, with up to 270% assistance. The Bosch 400 Wh battery pack has a maximum range of 62 miles, and the easy-to-read display lets you know when it’s time to recharge. These kits are only available in the store; listing is for the electric motor kit only--trike and installation sold separately.

Engineered to stand out day and night, the Cygolite Hotshot SL™ 50 rear bicycle light delivers nearly twice the output of the original Hotshot™ with powerful 50 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its power combines with an impressive 200 hours of run time to give you a large presence anytime and anywhere. The Cygolite Hotshot SL 50 features: - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water resistant design weighs only 55 grams - Seat post mount included - 2:30 ~ 200 hr run time

This high quality Tacx 750ml water bottle is a finishing touch to any ICE Trike and a great way to fill any bottle cage. The bottle has an innovative, easy-to-clean membrane cap, manufactured in the Netherlands. Thanks to the hygienic lock system, you can drink from it easily and it is dishwasher-safe.

This accessory allows a bottle cage to be mounted facing the rider for easy removal of the bottle while riding. It fits nicely on the front frame of ICE recumbent trikes. Bottle and cage not included; not all cages fit on the riser.

The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.) Fits 22.2 mm diameter tubes.

Use the easy adjust kit to quickly resize your ICE recumbent trike for different riders without the use of tools, including adjusting the chain length for the rider. This adjuster is very useful for trikes which are shared with more than one rider, but is not needed for any trike which is used exclusively by one rider. Fits all ICE trikes except the VTX.

Front fenders for front suspension trikes featuring specific suspension mounting to allow the mudguard to move with the wheel and maintain effectiveness across all travel positions. If you ride on wet or dusty roads, you'll like having fenders to keep road spray off of you.

Is your bike or trike missing bosses for attaching a water bottle cage? This handy adapter could make all the difference in keeping you hydrated on your rides. - BH-95X adapter provides an extra bottle cage mount on bars, frame or seatpost - Universal band clamp fits any diameter tubing between 22-35mm -Rotates six degrees, making it easier to get to your water bottle when it is mounted in certain locations, such as on a seat post - Stainless steel construction - Includes two screws for mounting a bottle cage holder (sold separately)

Schwalbe completely revised the extra-wide Big Apple tire. The pronounced profile combined with the RaceGuard puncture protection belt now makes it even more suitable for everyday life. Enjoy the comfort these special wide tires provide through the principle of pneumatic air suspension. The large volume air cushion has a natural damping effect, making complicated suspension technology redundant. Reflective stripes on the sidewalls help keep you visible in the dark, too.

Schwalbe's fastest and lightest Marathon bicycle tire. The Marathon Racer features excellent speed and grip in wet conditions. LiteSkin sidewall with reflective stripe to make you more visible in dark and dreary conditions. Always inflate to the recommended pressure.

Marathon Racer The fastest Marathon ever. Again! Now even lighter. Now even faster. Pure skin side walls and the new Speedgrip compound have further reduced weight and rolling resistance. Everything is optimized for speed. Pure dynamics: the low weight is noticeable every time you pull away. A Kevlar RaceGuard® belt protects against punctures. Reflective strip on sidewall provides extra saftey at night.

Big, bold colors in a recumbent-friendly shape enhance your visibility and add a dash of personality to your ride. Reflective areas glow in headlights, too. Size: 9 inches X 34 inches. Available with or without a black, 72 inches x 1/4 inch, three-piece, collapsible hollow fiberglass pole.

SportCrafters trike trainers are specifically designed for recumbent trikes. Easy to use, lightweight and portable, SportCrafters trike trainers do not require any assembly or maintenance. The OverDrive Trike Trainer, powered by ARC Technology, automatically adjusts in resistance as the rider changes speed – no manual adjustment necessary. In higher speeds, the OverDrive Trike Trainer will ramp up the resistance to realistically mimic road riding conditions. This trainer is perfect for the active trike customer who wants to maintain fitness while riding indoors, and for households with multiple users at varying fitness levels, as the trainer functions with low to moderate resistance when it is turned around. For tadpole and one-wheel drive delta trikes - use one trainer (with a block for the second wheel, if necessary). For two-wheel drive delta trikes, we offer a pair of trainers: contact us for information. BEFORE YOU BUY be aware that you may experience slight fore-aft rocking, which is entirely dependent on how tightly you can lock your front brakes and how stiff your trike frame is. Unlike a clamping trainer, this trainer does not lock your trike in place. The vast majority of users don't mind the slight motion, and in fact you can use this gentle feedback to help develop a smoother cadence. Features and benefits: Change the resistance level simply by changing gears Resistance feels like riding on the road Lightweight, compact and easy to transport and store Accommodates 16" to 700c wheels Easy set-up requires no clamping on the rear skewer 100% designed and manufactured in Granger, Indiana, USA Lifetime warranty Specifications: Aluminum drums: 3.25" (82.5mm) diameter, 1/8" (3mm) wall thickness Drums are lathed on the axle for precision runout and balance All drums are dynamically spin balanced, and will not distort in heat or sunlight Bearings are greased and sealed, and do not require maintenance Steel framework is zinc-plated and powder coated for ultimate durability End caps: Molded polycarbonate Product dimensions: 21" x 4.25" x 10" (53.3cm x 10.8cm x 25.4cm) This product contains chemicals, including Acrylonitrile, Bisphenol-A and Methylene chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.

Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams

These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.

These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).