Looking for a way to carry two Catrike recumbent trikes, or other tadpole trikes? Look no further! This easy-to-use hitch-mount recumbent trike carrying rack carries one or two tadpole trikes, or a bike and a trike. Carrying arms adjust to fit many different types of bikes and trikes, plus the cinch straps adapt to many frame configurations. Tadpole Double Carrier 1.25. Fits in 1 1/4 inch hitches. Will carry two tadpole trikes. Warning: Use this carrier with receiver hitches bolted directly to the frame of the vehicle or to a bumper or hitch with a 300 pound or higher tongue load rating. Limit the load to 100 pounds. Because of leverage smaller hitches are not strong enough for this carrier. The trunk strap provided can be used to reduce the leverage and stress on the carrier, hitch and vehicle. Be sure to attach the flat hook to a point on the vehicle strong enough for the forces applied. (DO NOT ATTACH THE STRAP TO PLASTIC TRUNKS). The carrier can be used without the strap if the hitch and vehicle are adequate for the load. A hitch with a 200 pound tongue load rating is also rated as a 2-bike carrier capacity hitch by the manufacturer. Since trikes are heavier than bikes the use of this carrier exceeds the capacity of these hitches. Do so at your own risk.
Transport your trike and a bike and save your back, too, with Hollywood's Sport Rider Heavy Duty Recumbent rack with trike adaptor. Simply set your recumbent or non-recumbent bike and a trike into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. Plus, the Sport Rider folds up when not in use for easy storage and tilts down so you can access the rear car door. • Hitch Size: 2 inches • Space between bikes: 18 inches • Not to be used on any trailer, fifth wheel, or towed vehicle • Max weight capacity: 45 lbs per bike • Includes a keyed alike locking hitch pin and security cable
Do you have a 2 inch hitch receiver and two tadpole trikes to transport? This is the rack for you! This easy-to-use hitch-mount recumbent trike carrying rack carries one or two tadpole trikes, or a bike and a trike. Carrying arms adjust to fit many different types of bikes and trikes, plus the cinch straps adapt to many frame configurations. Alpaca Two Tadpole Carrier will carry two tadpole trikes. Fits a 2 inch hitch receiver.
Atoc's unique pivoting system works with tandems, recumbent bikes, and single bikes, and allows: Easy one person loading (even for a small person) Fast - takes less than one minute No greasy chains to reach around No heavy or awkward lifting--You never lift more than 1/2 your tandem's weight Tandem Topper stabilizes the tandem for you while loading and unloading No contact points to damage your tandem's finish Fits most roof rail systems: Yakima and Thule compatible mounting clips come standard. Works with most vehicles - small, large, short, or tall. It needs a mere 22" minimum load bar spacing Only 5 1/2" wide ... which means you can carry lots of bikes (or other stuff) Tandem Topper's unique design protects your vehicle and bike from dents and scratches. Tandem Topper's rear section easily disconnects, allowing your hatchback to fully open ... without damage. The DV comes with extra long wheel tray (82" max. wheelbase). A breeze to install!
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation.
Atoc's non-pivoting system works with recumbent bikes, and single bikes, and features: No contact points to damage your bike's finish Fits most roof rail systems: Yakima and Thule compatible mounting clips come standard. Only 5 1/2" wide ... which means you can carry lots of bikes (or other stuff) on your rack, too. The BT-76C includes a quick disconnect tail section, fits bikes with a wheelbase up to 76" with a minimum load bar spacing of 22". A breeze to install!
The Spoiler Clearance Solution. The new Over-theTop bike rack from Hollywood Racks features an adjustable "high rise" frame which prevents strap contact with the spoiler. Includes removable hatch anchors and quick connect straps for secure attachment to hatches, trunks, roof rack cross bars and roof rack raised rails. Also, fits most vehicles without a spoiler. This rack carries 2 bikes Spacing between bike cradles: 9” Distance between support arms: 11.5” Features list: • Carries two bikes • Designed for vehicles with spoilers • Includes special attachment straps for roof racks and glass hatches • Soft rubber cradles protects bike’s finish • Anti-sway bike cradles keeps bikes separated and rigid. • Quick release adjustment hubs • Six attachment straps for secure fitting • Comes fully pre-assembled • Folds flat for easy storage. • Integrated tie-down strap for extra security • Limited Lifetime Warranty
Maximize your off-road exploring with Hollywood's Spare-Tire Rack! This smart rack carries 2 bikes, is fully adjustable to fit most rear spare tires, and boasts a rugged and simple strap design that holds fast and allows speedy installation and removal. Plus, the rack's support arms can be centered for off-center-mounted tires and folded down when not in use. The Spare Tire Rack comes fully assembled, too. • Distance between bike support arms: 13-inch • Distance between bike cradles: 7-inch • Maximum tire width 12-inch
As its name implies, Hollywood's F4 Heavy Duty is made from beefy steel tubing that gives it the strength to easily carry 4 bikes. Plus, Hollywood's exclusive dual-position trunk/bumper system allows a custom fit on all sedans, hatchbacks, mini-vans, and SUVs. Sturdy tie-down buckles and side straps ensure a secure fit for heavy loads, too. And, the F4 Heavy Duty comes completely assembled and it folds flat for easy storage.
Now you can take your cruiser or chopper on adventures with Hollywood's Gordo trunk rack. Its arms are spaced an extra-wide 22 inches apart to accommodate long wheelbases, and this sweet rack carries up to 2 bikes. Soft cradles protect your bike's finish while integrated tie-down straps ensure stability while driving. Installing the pre-assembled Gordo is a breeze thanks to the adjustment hubs with quick-release levers and when not in use the rack folds flat for easy storage! • Spacing between bike cradles: 11-inch • Distance between bike support arms: 22-inch
Page 1 of 1