Recumbent Trike Accessories/Parts
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands on your recumbent trike? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters? This accessory mount is the one. This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp goes forward and inward a little bit and holds mounting tube that goes up and then out. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. Left or right hand installation. This mount is not for assistance in getting in and out of your trike.
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
$128.00 - $160.00
Looking to electrify your Catrike recumbent trike? This CNC machined battery mount allows you to mount a battery under the seat and close to the centerline of your Catrike, the best place to mount a battery. The mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The battery shelf is large and sturdy, and set up to hold the common batteries, like the BionX, that use standard bottle boss spacing. Additional plates to mount less common batteries like the BionX rear rack battery are also available. For other batteries in shrink wrap or nylon housings, you can usually strap them on or use zip ties. Precision made for Catrike recumbent trikes, this battery mount is the super sturdy, elegant battery solution that you need for your electric trike. On the folding Catrikes, the battery mount has to be on the right in order to work with the fold. Right side configurations include the optional extender to clear the chain. On the Villager, the extender is required for both sides. Recommended maximum battery weight is 15 lbs (6.8Kg).
This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The attaches your electric motor kit battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.
If more than one person rides your Catrike, then a Catrike Boom Adjust Chain Tensioner is perfect to eliminate the worries of whether the chain is too long or too short! TerraCycle's Catrike Boom Adjust Chain Tensioner allows you to move your boom without hassling with the chain. It automatically compensates for changes in chain length when you adjust the seat for different riders. Perfect for anyone that would like to share their Catrike with different riders. The installation is simple, design is sleek and materials are strong. All parts are black anodized CNC machined 6061 T6 Aluminum. All fasteners are stainless steel. The idlers are Delrin with 6mm sealed cartridge bearings. The front clamp is machined specifically for the Catrike boom tube, which is a special custom size. The length of the front arm is designed to cover the full range of boom adjustment. The idlers are high quality and have sealed cartridge ball bearings that will outlast the other parts of your drivetrain by several times.
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
This pack can attach to the back of a recumbent seat if there is a horizontal bar available, as in the Sunseeker bikes and trikes and many Catrike models. A roomy pack measuring 8 inches tall, 11.5 wide, and 4 inches thick, you can carry your essentials and a little more, but is not designed for heavy cargo.
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
Looking for handles to help you get on or off of your Catrike? These are the Assist Arms for you! The long, curving arms provide multiple gripping positions and provide a generous area to rest your wrists and arms. Centered over the front wheels, the arms are centered and extend forward so they are easy to reach when you are first getting on, and extend back towards you when you're seated to help you start to get up. Your grip is always natural and comfortable.
This versatile bag could hold a small pump, tools, spare tube, phone, wallet, and snack bar, and is designed to fit on tubes up to 70mm or so, including the main tubes on Bacchetta’s Carbon Aero. Made from waterproof materials and a waterproof zipper, the Fastback NorBack frame pack will keep your stuff dry in all but the very wettest conditions, and is built to last. Details: 14 inches (35mm) long, 5 inches (13cm) tall. There is one main pocket with a wide Velcro loop on the ceiling that is designed to hold a mini pump. There are two zipper pockets on the inside front. The top is reinforced with a removable stiffener to keep it in position on your bike. Compatible with nearly any bike or trike.
The FastBack Tool Pouch is for those couple of tubes, tire tools and cell phone that you never quite have a place to put. Fits nicely onto a FastBack 4.0 or M70 Hydration Pack, it can also be mounted directly onto some recumbent bikes, trikes and racks. The Tool Pouch is essentially a rectangle, with the top and bottom lengths at 102mm (4"), the sides at 216mm (8.5"), and a 51mm (2") depth. The clip-on strap is 178mm (7") long (51mm (2") of which is the clip). The Velcro straps reaching from the top are 114mm (4.5") and the ones from the bottom are 95mm (3.75"). Toss that camera in there and take a picture of yourself at the top of the mountain, riding farther, having more fun on your bike.
$55.00 - $65.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
These flags are superbly designed for both high performance and high style. The rakish aero shape is tuned for visibility, low drag, and just the right amount of attention getting back-and-forth waving. Highly visible under multiple lighting conditions and backgrounds, yet very stylish and something you can be proud to ride with. Made from highly weather and UV resistant outdoor polyester for long life and excellent resistance to fading. Poles are solid fiberglass, with two 36in (0.9m) long sections. Sections are joined by a special carbon fiber ferrule with a silicone rubber grip collar to keep things together until you want them apart. Flag is shaped for visual contrast, aerodynamics, and controlled flapping, even at high speeds. Reflective spine, accents and streamers enhance visibility.
Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
Super visible, super stylin' and super fun! These flags are superbly designed for both high performance and high style. The rakish aero shape is tuned for visibility, low drag, and just the right amount of attention getting back-and-forth waving. Highly visible under multiple lighting conditions and backgrounds, yet very stylish and something you can be proud to ride with. --made of outdoor polyester --reflective details --comes with a high visibility tassel --two-piece collapsible 6mm fiberglass pole included
This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.
This accessory allows a bottle cage to be mounted facing the rider for easy removal of the bottle while riding. It fits nicely on the front frame of ICE recumbent trikes. Bottle and cage not included; not all cages fit on the riser.
This clamp-on flag mount fits 1" diameter tubes, such as the cross bar on the back of ICE and Catrike recumbent trikes. Easy to install, it enables you to put your flag up higher on your recumbent trike for increased visibility on the road.
This attaches to the end of the kingpost on an ICE recumbent trike, and allows the sensor to be easily positioned to pick up the magnet signal.
$225.00 - $230.00
The ICE Ergo-Luxe seat cover is a super comfortable recumbent trike seat. Beautifully designed to provide the ultimate level of comfort and back support. Breathable fabrics maximise airflow, and ergonomic extra cushioning in the base and sides further enhance comfort. The tension in the back can be easily adjusted to suit the rider. Integral Sidepod mounts eliminate the need for over the seat Sidepod straps. Includes a handy weather-sealed pocket on top for small items such as keys and phones. Reflective side detailing keeps you safe at night. Seat cover only. Shown in the photo with frame for illustration purposes. Fits Adventure or Adventure HD seat frames from 2017 onwards (check for compatibility with your frame before ordering a retrofit). Can be purchased as a seat frame and cover pack also.
ICE's Ergo neck-rest is now wider and even more comfortable, and this padded replacement cover is designed to fit the existing mesh seat neck rest. Adjustable tension strap for fully customizable comfort and reflective detailing to keep you safe at night.
High visibility flag with three-piece pole for convenient storage. With ICE logo, a reflective strip and decoration, and an eyelet for attaching streamers.
Use this light mount for either handlebar type lights or dynamo lights on ICE recumbent trikes with twin M5 bosses only (ICE Trikes from 2008 onwards). Light sold separately.
The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.) Fits 22.2 mm diameter tubes.
Page 1 of 2 Next page