Skip to main content

Filter By:

More

$14.00
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
$24.00
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
$137.00
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
$87.00
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
$50.00
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
$128.00
This is the Power Idler kit to seriously upgrade your stock sytem. Custom idler mounting brackets house a Terracycle Power Idler in Titanium cog. You won't believe how much smoother and quieter your bike will be until you install this kit and go for your first test ride. Note: On older bikes with the square seat channel, you may need to trim the excess length from the right side seat clamp L bracket. Since TerraCycle idlers are larger for greater efficiency, this raises the chainline and may produce rubbing of the chain on the right side L bracket unless it is shortened. Rad-Loc seat clamp bikes are OK.
$4.00
Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.
$7.50
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
$29.00
This clever little mount lets you put one light out the back of your TerraCycle TailSok rear fairing, and another light INSIDE your sock to really really light things up! Lighting your sock from the inside really makes an attention-getting display. Designed to slide right on your TerraCycle TailSok Frame.
Page 1 of 1