Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

More

T-Cycle Catrike Boom Adjust Chain Tensioner
$145.00
If more than one person rides your Catrike, then a Catrike Boom Adjust Chain Tensioner is perfect to eliminate the worries of whether the chain is too long or too short! TerraCycle's Catrike Boom Adjust Chain Tensioner allows you to move your boom without hassling with the chain. It automatically compensates for changes in chain length when you adjust the seat for different riders. Perfect for anyone that would like to share their Catrike with different riders. The installation is simple, design is sleek and materials are strong. All parts are black anodized CNC machined 6061 T6 Aluminum. All fasteners are stainless steel. The idlers are Delrin with 6mm sealed cartridge bearings. The front clamp is machined specifically for the Catrike boom tube, which is a special custom size. The length of the front arm is designed to cover the full range of boom adjustment. The idlers are high quality and have sealed cartridge ball bearings that will outlast the other parts of your drivetrain by several times.
T-Cycle Catrike Dual Idler Kit (Sport)
$137.00
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
T-Cycle Rans Rocket VRex Idler Kit
$128.00
This is the Power Idler kit to seriously upgrade your stock sytem. Custom idler mounting brackets house a Terracycle Power Idler in Titanium cog. You won't believe how much smoother and quieter your bike will be until you install this kit and go for your first test ride. Note: On older bikes with the square seat channel, you may need to trim the excess length from the right side seat clamp L bracket. Since TerraCycle idlers are larger for greater efficiency, this raises the chainline and may produce rubbing of the chain on the right side L bracket unless it is shortened. Rad-Loc seat clamp bikes are OK.
T-Cycle Catrike Idler Completer Kit (Sport)
$87.00
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
T-Cycle Headlight mount for Catrike e-Cat
$69.95
This headlight mount from Terra Cycle makes it easy to light up the road in front of your Catrike e-Cat. Light sold separately.
T-Cycle Handlebar accessory mount clamp
$59.00 - $69.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
T-Cycle Cockpit Mini-T
$50.00
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
T-Cycle Multi-purpose Accessory Mount
$50.00
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
T-Cycle T-Bar
$39.00
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
T-Cycle TailSok Light Mount Kit
$29.00
This clever little mount lets you put one light out the back of your TerraCycle TailSok rear fairing, and another light INSIDE your sock to really really light things up! Lighting your sock from the inside really makes an attention-getting display. Designed to slide right on your TerraCycle TailSok Frame.
T-Cycle Double-ended Cockpit Clamp
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
T-Cycle Elbow mount tube
$27.00
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
T-Cycle Bar End Shifter Micro Mount
$24.00
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
T-Cycle Accessory Mount Clamps
$14.00
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
T-Cycle Short Link Tube
$7.50
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
T-Cycle Rubber Light Mount
$4.00
Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.
Page 1 of 1