Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

More

Ice Trikes Front fender set for rigid front
$205.00
The ICE front fenders are supported by anodized 6061 heat treated aluminum frames with a plastic profile body. The fenders are adjustable for angle and vertical height. This version fits the rigid front end with 20" wheels.
SportCrafters OverDrive Trike Trainer (MR110)
$199.00
SportCrafters trike trainers are specifically designed for recumbent trikes. Easy to use, lightweight and portable, SportCrafters trike trainers do not require any assembly or maintenance. The OverDrive Trike Trainer, powered by ARC Technology, automatically adjusts in resistance as the rider changes speed – no manual adjustment necessary. In higher speeds, the OverDrive Trike Trainer will ramp up the resistance to realistically mimic road riding conditions. This trainer is perfect for the active trike customer who wants to maintain fitness while riding indoors, and for households with multiple users at varying fitness levels, as the trainer functions with low to moderate resistance when it is turned around. For tadpole and one-wheel drive delta trikes - use one trainer (with a block for the second wheel, if necessary). For two-wheel drive delta trikes, we offer a pair of trainers: contact us for information. BEFORE YOU BUY be aware that you may experience slight fore-aft rocking, which is entirely dependent on how tightly you can lock your front brakes and how stiff your trike frame is. Unlike a clamping trainer, this trainer does not lock your trike in place. The vast majority of users don't mind the slight motion, and in fact you can use this gentle feedback to help develop a smoother cadence. Features and benefits: Change the resistance level simply by changing gears Resistance feels like riding on the road Lightweight, compact and easy to transport and store Accommodates 16" to 700c wheels Easy set-up requires no clamping on the rear skewer 100% designed and manufactured in Granger, Indiana, USA Lifetime warranty Specifications: Aluminum drums: 3.25" (82.5mm) diameter, 1/8" (3mm) wall thickness Drums are lathed on the axle for precision runout and balance All drums are dynamically spin balanced, and will not distort in heat or sunlight Bearings are greased and sealed, and do not require maintenance Steel framework is zinc-plated and powder coated for ultimate durability End caps: Molded polycarbonate Product dimensions: 21" x 4.25" x 10" (53.3cm x 10.8cm x 25.4cm) This product contains chemicals, including Acrylonitrile, Bisphenol-A and Methylene chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm Shipping for this product is $19.95.
T-Cycle Catrike Boom Adjust Chain Tensioner
$145.00
If more than one person rides your Catrike, then a Catrike Boom Adjust Chain Tensioner is perfect to eliminate the worries of whether the chain is too long or too short! TerraCycle's Catrike Boom Adjust Chain Tensioner allows you to move your boom without hassling with the chain. It automatically compensates for changes in chain length when you adjust the seat for different riders. Perfect for anyone that would like to share their Catrike with different riders. The installation is simple, design is sleek and materials are strong. All parts are black anodized CNC machined 6061 T6 Aluminum. All fasteners are stainless steel. The idlers are Delrin with 6mm sealed cartridge bearings. The front clamp is machined specifically for the Catrike boom tube, which is a special custom size. The length of the front arm is designed to cover the full range of boom adjustment. The idlers are high quality and have sealed cartridge ball bearings that will outlast the other parts of your drivetrain by several times.
T-Cycle Catrike Dual Idler Kit (Sport)
$137.00
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
T-Cycle Rans Rocket VRex Idler Kit
$128.00
This is the Power Idler kit to seriously upgrade your stock sytem. Custom idler mounting brackets house a Terracycle Power Idler in Titanium cog. You won't believe how much smoother and quieter your bike will be until you install this kit and go for your first test ride. Note: On older bikes with the square seat channel, you may need to trim the excess length from the right side seat clamp L bracket. Since TerraCycle idlers are larger for greater efficiency, this raises the chainline and may produce rubbing of the chain on the right side L bracket unless it is shortened. Rad-Loc seat clamp bikes are OK.
T-Cycle Catrike Idler Completer Kit (Sport)
$87.00
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
T-Cycle Headlight mount for Catrike e-Cat
$69.95
This headlight mount from Terra Cycle makes it easy to light up the road in front of your Catrike e-Cat. Light sold separately.
T-Cycle Handlebar accessory mount clamp
$59.00 - $69.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
T-Cycle Cockpit Mini-T
$50.00
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
T-Cycle Multi-purpose Accessory Mount
$50.00
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
T-Cycle T-Bar
$39.00
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
Bacchetta Light mount One armed bandit
$32.00
Bacchetta's One Armed Bandit light mount puts your light out in front closer to the road so there is no more foot flash. Fits on 1 1/8" inch tubes, such as the front derailleur mast of Bacchetta models.
Cygolite Hotshot SL 50
$29.95
Engineered to stand out day and night, the Cygolite Hotshot SL™ 50 rear bicycle light delivers nearly twice the output of the original Hotshot™ with powerful 50 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its power combines with an impressive 200 hours of run time to give you a large presence anytime and anywhere. The Cygolite Hotshot SL 50 features: - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water resistant design weighs only 55 grams - Seat post mount included - 2:30 ~ 200 hr run time
T-Cycle TailSok Light Mount Kit
$29.00
This clever little mount lets you put one light out the back of your TerraCycle TailSok rear fairing, and another light INSIDE your sock to really really light things up! Lighting your sock from the inside really makes an attention-getting display. Designed to slide right on your TerraCycle TailSok Frame.
T-Cycle Double-ended Cockpit Clamp
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
T-Cycle Elbow mount tube
$27.00
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
Catrike Mirror and Computer mount
$25.00
Give yourself an easy view of computers and mirrors and other accessories for your Catrike recumbent trike with this mount made especially for Catrikes. Choose one for the left or right side of your recumbent trike, or order a pair. (This is the mount only; Computer, mirrors and other accessories sold separately.)
T-Cycle Bar End Shifter Micro Mount
$24.00
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
Minoura SGS-400-STD Clamp
$19.95
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp (included) reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable 90 degrees and uses Hex Bolt for installation - Fits round tubing 22mm-29mm diameter
T-Cycle Accessory Mount Clamps
$14.00
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
Minoura LW-STD Clamp
$12.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range
Minoura BH-95x Universal Bottle Cage Adapter
$9.95
Is your bike or trike missing bosses for attaching a water bottle cage? This handy adapter could make all the difference in keeping you hydrated on your rides. - BH-95X adapter provides an extra bottle cage mount on bars, frame or seatpost - Universal band clamp fits any diameter tubing between 22-35mm -Rotates six degrees, making it easier to get to your water bottle when it is mounted in certain locations, such as on a seat post - Stainless steel construction - Includes two screws for mounting a bottle cage holder (sold separately)
Origin8 Amica
$9.95
This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.
T-Cycle Short Link Tube
$7.50
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
No Image
$5.00
This replacement pad fits on the brackets already installed on newer Catrike recumbent trikes. Need a set? Order two.
T-Cycle Rubber Light Mount
$4.00
Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.
Page 1 of 1