TerraCycle's WINTR Fairing Kit can keep you riding even when the winds blow cold. WINTR stands for Weather-Inhibiting 'N Travel Ready. When the shelter provided by a time-tested Windwrap fairing combines with the easy to install and easy to transfer mounting hardware from T-Cycle, you have a system meticulously designed to keep you on the road no matter what the weather is doing. Utilizing the power of T-Cycle's exquisite CNC machining, the mounting hardware is stronger and simpler to use than ever before. The WINTR Fairing Kit includes a fairing along with all the mounting hardware needed to mount it to your bike or trike.
Looking for a way to carry two Catrike recumbent trikes, or other tadpole trikes? Look no further! This easy-to-use hitch-mount recumbent trike carrying rack carries one or two tadpole trikes, or a bike and a trike. Carrying arms adjust to fit many different types of bikes and trikes, plus the cinch straps adapt to many frame configurations. Tadpole Double Carrier 1.25. Fits in 1 1/4 inch hitches. Will carry two tadpole trikes. Warning: Use this carrier with receiver hitches bolted directly to the frame of the vehicle or to a bumper or hitch with a 300 pound or higher tongue load rating. Limit the load to 100 pounds. Because of leverage smaller hitches are not strong enough for this carrier. The trunk strap provided can be used to reduce the leverage and stress on the carrier, hitch and vehicle. Be sure to attach the flat hook to a point on the vehicle strong enough for the forces applied. (DO NOT ATTACH THE STRAP TO PLASTIC TRUNKS). The carrier can be used without the strap if the hitch and vehicle are adequate for the load. A hitch with a 200 pound tongue load rating is also rated as a 2-bike carrier capacity hitch by the manufacturer. Since trikes are heavier than bikes the use of this carrier exceeds the capacity of these hitches. Do so at your own risk.
Do you have a 2 inch hitch receiver and two tadpole trikes to transport? This is the rack for you! This easy-to-use hitch-mount recumbent trike carrying rack carries one or two tadpole trikes, or a bike and a trike. Carrying arms adjust to fit many different types of bikes and trikes, plus the cinch straps adapt to many frame configurations. Alpaca Two Tadpole Carrier will carry two tadpole trikes. Fits a 2 inch hitch receiver.
Atoc's unique pivoting system works with tandems, recumbent bikes, and single bikes, and allows: Easy one person loading (even for a small person) Fast - takes less than one minute No greasy chains to reach around No heavy or awkward lifting--You never lift more than 1/2 your tandem's weight Tandem Topper stabilizes the tandem for you while loading and unloading No contact points to damage your tandem's finish Fits most roof rail systems: Yakima and Thule compatible mounting clips come standard. Works with most vehicles - small, large, short, or tall. It needs a mere 22" minimum load bar spacing Only 5 1/2" wide ... which means you can carry lots of bikes (or other stuff) Tandem Topper's unique design protects your vehicle and bike from dents and scratches. Tandem Topper's rear section easily disconnects, allowing your hatchback to fully open ... without damage. The DV comes with extra long wheel tray (82" max. wheelbase). A breeze to install!
The ICE front fenders are supported by anodized 6061 heat treated aluminum frames with a plastic profile body. The fenders are adjustable for angle and vertical height. This version fits the rigid front end with 20" wheels.
SportCrafters trike trainers are specifically designed for recumbent trikes. Easy to use, lightweight and portable, SportCrafters trike trainers do not require any assembly or maintenance. The OverDrive Trike Trainer, powered by ARC Technology, automatically adjusts in resistance as the rider changes speed – no manual adjustment necessary. In higher speeds, the OverDrive Trike Trainer will ramp up the resistance to realistically mimic road riding conditions. This trainer is perfect for the active trike customer who wants to maintain fitness while riding indoors, and for households with multiple users at varying fitness levels, as the trainer functions with low to moderate resistance when it is turned around. For tadpole and one-wheel drive delta trikes - use one trainer (with a block for the second wheel, if necessary). For two-wheel drive delta trikes, we offer a pair of trainers: contact us for information. BEFORE YOU BUY be aware that you may experience slight fore-aft rocking, which is entirely dependent on how tightly you can lock your front brakes and how stiff your trike frame is. Unlike a clamping trainer, this trainer does not lock your trike in place. The vast majority of users don't mind the slight motion, and in fact you can use this gentle feedback to help develop a smoother cadence. Features and benefits: Change the resistance level simply by changing gears Resistance feels like riding on the road Lightweight, compact and easy to transport and store Accommodates 16" to 700c wheels Easy set-up requires no clamping on the rear skewer 100% designed and manufactured in Granger, Indiana, USA Lifetime warranty Specifications: Aluminum drums: 3.25" (82.5mm) diameter, 1/8" (3mm) wall thickness Drums are lathed on the axle for precision runout and balance All drums are dynamically spin balanced, and will not distort in heat or sunlight Bearings are greased and sealed, and do not require maintenance Steel framework is zinc-plated and powder coated for ultimate durability End caps: Molded polycarbonate Product dimensions: 21" x 4.25" x 10" (53.3cm x 10.8cm x 25.4cm) This product contains chemicals, including Acrylonitrile, Bisphenol-A and Methylene chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm Shipping for this product is $19.95.
The best place to locate pannier loads on recumbent bikes is under the seat, and these TerraCycle underseat racks let you do just that. This position maintains stability and allows you to carry heavier loads with ease. You also have easier access to items that you need readily accessible. Made in the USA with high strength, lightweight 6061 aluminum, beautifully machined rack arms, tig welded pannier rails, stainless steel fittings, the racks work well for touring and commuting. The racks are designed to fit most panniers whose hooks are near the top. Many manufacturers are offering recumbent specific under seat panniers, making the selection even better. NOTE: This underseat rack does not generally work well with Ortlieb panniers. Around the block or around the world, a TerraCycle rack is one of the most useful accessories for your recumbent bike.
$159.96 $199.95 20% Off
Safely carry your laptop, extra clothing, lunch and important files on or off the bike. The exterior fabric is a mix of tough and durable 1000 Denier Cordura® nylon and Sunbrella® acrylic, a fabric used in awnings and boat covers. This elegant and super functional pannier will guard against and withstand whatever the road throws at you and will outlast any bag you've used in the past. Features: Arkel's cam lock attachment system--easy to use and keeps your bag on your rack until you take it off. Weather resistant. Inside completely lined with waterproof fabric. Built in laptop compartment that can hold up to 15” laptops. Internal backplate protects laptop against shocks on the bike and when set on the floor. Deluxe shoulder strap (color coordinated). 2 outside zippered pockets for easy storage and access to keys, wallet and cell phone. Reflective material on all sides. Lifetime warrantee Weight: 1.17g / 2.6 lbs (unit) Volume: 23 l. / 1400 cu. in. (unit) Dimensions: 17" x 6" x 12", with mounting hardware 14.5" from bottom
Arkel's Catrike Expedition Panniers are specifically made to fit Catrike's Expedition, Road and Speed recumbent trikes. These neat bags attach directly to your frame, no rack necessary! Arkel builds them in Sherbrooke, Canada from 600 denier polyester fabric with foam and high density polyethelene stiffeners for impressive durability. - See Bike Compatibility Chart for fitment details
The SIGNATURE H is a waterproof bike pannier (Horizontal briefcase style design) for urban bike travel. This pannier is made of 1000 denier Cordura® nylon lined with a waterproof TPU laminated fabric with fully taped seams. Tough, durable and waterproof, this pannier is equipped with Arkel's world renowned Cam-Lock® full aluminum attachment system. The SIGNATURE H will carry all of your essentials to work or school, day in and day out. This pannier is made in Canada and personally signed by its maker. • Lined with waterproof material with fully taped seams. • Padded laptop compartment • Zippered pocket inside for smaller items • Cam-Lock® mounting system • Padded mounting hardware cover for added comfort off the bike • Carry handle • Comfortable 2” shoulder strap • Offset shoulder strap attachment points for comfortable and balanced load • Multiple attachment points for shoulder strap - you can comfortably carry the bag fully opened for grocery shopping • Reflective patches for night safety • Shopping bag style carry handles accessible when the bag is fully open • Flat bottom allows the bag to stay upright • Waterproof liner is removable for washing
If more than one person rides your Catrike, then a Catrike Boom Adjust Chain Tensioner is perfect to eliminate the worries of whether the chain is too long or too short! TerraCycle's Catrike Boom Adjust Chain Tensioner allows you to move your boom without hassling with the chain. It automatically compensates for changes in chain length when you adjust the seat for different riders. Perfect for anyone that would like to share their Catrike with different riders. The installation is simple, design is sleek and materials are strong. All parts are black anodized CNC machined 6061 T6 Aluminum. All fasteners are stainless steel. The idlers are Delrin with 6mm sealed cartridge bearings. The front clamp is machined specifically for the Catrike boom tube, which is a special custom size. The length of the front arm is designed to cover the full range of boom adjustment. The idlers are high quality and have sealed cartridge ball bearings that will outlast the other parts of your drivetrain by several times.
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
TerraCycle has developed this rack to attach your electric assist kit's valuable, heavy battery on your recumbent bike or trike: centered, low down, and out of the way. You'll hardly know it's there! Height and angle can be adjusted to fit just about any bike or trike on the market. The CNC machined mounting clamps precision made for the most common frame sizes. This battery mount is the super sturdy, elegant battery solution that the recumbent world has been waiting for. Contact us to order to assure proper fit for your bike/trike and battery.
This is the Power Idler kit to seriously upgrade your stock sytem. Custom idler mounting brackets house a Terracycle Power Idler in Titanium cog. You won't believe how much smoother and quieter your bike will be until you install this kit and go for your first test ride. Note: On older bikes with the square seat channel, you may need to trim the excess length from the right side seat clamp L bracket. Since TerraCycle idlers are larger for greater efficiency, this raises the chainline and may produce rubbing of the chain on the right side L bracket unless it is shortened. Rad-Loc seat clamp bikes are OK.
The FastBack Carbon Slim Seatback Bag is the one stop shop for hard-shell recumbent bike seats. Are you going to ride until the sun sets? Toss a jacket in the Carbon Slim. Gonna work up an appetite climbing that mountain? Fill the Carbon Slim with GORP and energy bars and you're set. Forgot it's Mother's Day? Grab some chocolates and a card and make haste! Terracycle's SpiderGrip technology is reconfigurable to achieve an exact, secure fit every time. Once you form the pocket to the shape of your seat, you can take it off and put it back on without any trouble at all. The FastBack Carbon Slim Seatback Bag will let you take your goodies with you when you want to ride far and ride fast.
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
Arkel's Recumbent Seat Bag features durable Cordura construction and is loaded with great Arkel features such as a flag pole sleeve, water bladder pocket, and hose port hole. Plus, it has exterior compression straps to stabilize your gear and accommodate variable seat widths while dual carry handles let you tote it along on off-bike adventures, too.
This smaller waterproof handlebar bag is great to carry a small camera, windbreaker, maps, wallet, and snacks. It is secured to the handlebar with adjustable velcro straps and it is super easy to install and remove. It can be carried off the bike with the included shoulder strap. Made of 1000 denier Cordura® nylon lined with a waterproof TPU laminated fabric with fully taped seams. Tough, durable and waterproof!! Weight: 180 gr / 0.4l bs (unit) Volume: 4 l. / 244 cu. in. (unit)
This headlight mount from Terra Cycle makes it easy to light up the road in front of your Catrike e-Cat. Light sold separately.
$59.00 - $69.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
Bacchetta's most popular bag for their recumbent bikes. Comes with an inside zippered pouch and insulated bladder sleeve (holds up to a 70oz. bladder). Features an outside mesh pocket, elastic strap on the top and reflective strip. All this in a bag that is much smaller than most on the market. Constructed of tough, 600 denier nylon and plastic insert to help retain its shape. Fits all Bacchetta recumbent bicycle seats. Size: 500 cubic inches
These flags are superbly designed for both high performance and high style. The rakish aero shape is tuned for visibility, low drag, and just the right amount of attention getting back-and-forth waving. Highly visible under multiple lighting conditions and backgrounds, yet very stylish and something you can be proud to ride with. Made from highly weather and UV resistant outdoor polyester for long life and excellent resistance to fading. Poles are solid fiberglass, with two 36in (0.9m) long sections. Sections are joined by a special carbon fiber ferrule with a silicone rubber grip collar to keep things together until you want them apart. Flag is shaped for visual contrast, aerodynamics, and controlled flapping, even at high speeds. Reflective spine, accents and streamers enhance visibility.
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
This clamp-on flag mount fits 1" diameter tubes, such as the cross bar on the back of ICE and Catrike recumbent trikes. Easy to install, it enables you to put your flag up higher on your recumbent trike for increased visibility on the road.
No one can predict the weather with 100% accuracy, and on an extended tour you are sure to run into at least a little rain now and then. To keep your panniers and gear dry, rain covers are an indispensable accessory. Arkel makes them out of yellow ultra light 1.9 oz Silicon Coated Ripstop Nylon, so they are feather light and don't take up much room. An elasticized drawstring allows them to be adjusted to fit the load and piece of stretch micro mesh fabric at the bottom allows any water that gets inside to drain. Besides keeping your panniers dry, rain covers also help keep them clean. We all know that the grit and grime that we can pick up on wet roads is some of the hardest dirt to get out. It is also detrimental to the pannier fabric. Washable rain covers help your panniers look better and last longer. Sizes available to fit all Arkel panniers and the handlebar bag.
High visibility flag with three-piece pole for convenient storage. With ICE logo, a reflective strip and decoration, and an eyelet for attaching streamers.
Schwalbe completely revised the extra-wide Big Apple tire. The pronounced profile combined with the RaceGuard puncture protection belt now makes it even more suitable for everyday life. Enjoy the comfort these special wide tires provide through the principle of pneumatic air suspension. The large volume air cushion has a natural damping effect, making complicated suspension technology redundant. Reflective stripes on the sidewalls help keep you visible in the dark, too.
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
Bacchetta's One Armed Bandit light mount puts your light out in front closer to the road so there is no more foot flash. Fits on 1 1/8" inch tubes, such as the front derailleur mast of Bacchetta models.
Page 1 of 2 Next page