Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Recumbent Shop

TerraCycle Rubber Gripper Grommet
$2.00
This handy little grommet fits into your Catrike flag mount and grips your flagpole, keeping it from falling out. It's that simple! It wedges into the upper window in the flag mount and grips the pole. It gives a nice amount of grip, enough to keep the pole from bouncing out but not so much that it's hard to get the pole in and out when you want to. Super simple and super effective.
Catrike Parking Brake Strap and Bracelet
$3.95
Catrike-branded Velcro strap holds the brake lever closed or makes a stylish bracelet.
Bacchetta Seat stay pin
$4.00
Bacchetta's recumbent bike seat stay pins work with most recumbent seat stays.
No Image
$5.00
This replacement pad fits on the brackets already installed on newer Catrike recumbent trikes. Need a set? Order two.
TerraCycle Short Link Tube
$7.50
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
 Standard Tube (Presta Valve)
$7.95
Standard tubes are the same (or similar) tubes supplied with new bicycles. Presta valves are lightweight, air-actuated valves found on some bicycle tubes. Choose the right size tube to fit your tire and rim. We carry only the highest-quality replacement tubes from top manufacturers. Keep plenty on hand and carry at least one spare with you for faster flat repairs. Check the owner's manual, the sidewall of your tire for the size or call for assistance before ordering. Presta valve tubes for recumbent bikes and trikes we carry tend to be the following sizes: 16 x 1 1/8 - 1 3/8 (ISO 37-340, 28-349, 37-349, 28-355) 20 X 1.25-1.5 (ISO 32/40-406) 20 X 1 1/8-1 3/8 (ISO 28/37-438/451) 26 X 1-1.25 (ISO 26/32-559/571) 26 X 1.5-1.75 (ISO 40/47-559/584) 700c X 18-23 (ISO 18/23-622/630) 700c X 28-32 (ISO 28/32-622/630) 700c X 35-43 (ISO 35/43-622) (27 x 1 3/8)
Rans Seat Rail Memory Loc
$7.95
Rans seat rail memory loc provide an easy way to keep your seat adjusted. Fits all Rans seats with Rad-loc
TerraCycle Accessory Mount Clamps
$8.00
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
Origin8 Amica
$9.95
This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.
Catrike Computer Mount
$12.95
Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.
Catrike Flag holder
$15.00
Plastic flag holder fits Catrike recumbent trikes and holds the flag securely in place while you ride.
No Image
$15.00
This attaches to the end of the kingpost on an ICE recumbent trike, and allows the sensor to be easily positioned to pick up the magnet signal.
Minoura Spacer Grip
$17.95
Use this spacer grip on your 1 1/8 headset to mount a computer or light. Capacity : One item (Cycle computer or LED light) Material : Aluminum Alloy Feature : Can mount above or below the stem by adjusting the angle. Use instead of a 10mm thickness headset spacer Not recommended for heavier accessories (maximum: 250g)
Ice Trikes Bottle Cage Riser
$18.00
This accessory allows a bottle cage to be mounted facing the rider for easy removal of the bottle while riding. It fits nicely on the front frame of ICE recumbent trikes. Bottle and cage not included; not all cages fit on the riser.
Minoura Bar-End Light Holder
$19.95
Lightweight Bicycle accessory mount adapter fits int eh end of your handlebars for perfect accessory placement. Made of alloy and resin, it will hold accessories weighing up to 150 grams Dimensions: 25.4 (D) x 40 (L) mm Mount up to 23mm (inside diameter of handlebar)
Sunlite Roll Pack Handlebar /Seat Bag
$19.95
Use this bag on the handlebars, or on the frame or back of many recumbent bikes. Great for carrying your spare tube and tire levers, multi-tool, wallet, phone, or other small items. Works on recumbent bikes and trikes with exposes seat tubes, such as the Catrike Villager or the Sun EZ Sport. Product Info: Black • 150 cubic inches capacity Product Details: Formed Stiffener insert Water resistant 600 denier polyester Large reflective trim Easy to install with cinch straps Handlebar mount
Bacchetta Seat Foam for Recurve Seat
$20.00
If you've been putting lots of miles on your bike, perhaps it's time to treat yourself to a new seat pad. Fits Bacchetta's recumbent bicycle Recurve seats.
TerraCycle Bar End Shifter Micro Mount
$24.00
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
TerraCycle Double-ended Cockpit Clamp
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
Minoura Space Grip SGS-400
$24.95
Lightweight Accessory Holder * Holds up to 2 accessories (light, computer, bottle cage holder, etc) * Lightweight and rustproof alloy construction * New LW-Clamp reduces weight 25 grams comparing to previous model * Alloy bar is position adjustable * Hex wrench required for installation/removal Standard size clamp (22.2 – 28.6 mm diameter) If you are not sure if this will fit, let us know the make and model of your bike or trike, and where you plan to install it, and we'll advise.
Sunlite Bar Tender II Handlebar Bag (Small)
$24.95
Looking for a little extra cargo room on your commute or doing a little day tripping? Check out Sunlite's Bar Tender Handlebar Bag. It quickly and easily mounts to your bars and gives you one large main compartment and a front pocket to keep your gear organized. This thing is built for the real world with its waterproof material, reflective accents and a removable carrying strap so you can go from bike to office in one easy swoop.
Racor Bike Lift
$24.99
The Racor Bike Lift is the perfect way to store your bicycle overhead and free up extra garage space. The Bike Lift uses a rope and pulley system that is mounted to your ceiling. Raise and lower a 50lb bike up to 12 feet by simply latching the hooks to the seat and handlebars and pulling the rope. When you’re ready to ride, unlock the rope and lower your bike… no ladders needed! The Bike Lift pulleys do most of the work–making a 50lb bike feel like it’s only about 12 pounds: a 4:1 mechanical advantage. A unique locking mechanism holds the rope securely in place to prevent accidental release. Some assembly required; installs into ceiling joists. Order yours today, and reclaim your garage!
No Image
$25.00 - $30.00
If the foam on the back of the seat cushion (upper) or the seat (lower) on your late-model Catrike Villager, Trail, Road, Dumont, or 559 needs replacement, this is what you want. Select either one part or both. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.
Catrike Mirror and Computer mount
$25.00
Give yourself an easy view of computers and mirrors and other accessories for your recumbent trike with this mount made especially for Catrikes. Choose one for the left or right side of your recumbent trike, or order a pair. (Computer, mirrors and other accessories sold separately.)
Sound Winds/Air Arts Fanion Reflective Flag
$26.00 - $36.00
Big, bold colors in a recumbent-friendly shape enhance your visibility and add a dash of personality to your ride. Reflective areas glow in headlights, too. Size: 9 inches X 34 inches. Available with or without a black, 72 inches x 1/4 inch, three-piece, collapsible hollow fiberglass pole.
TerraCycle Elbow mount tube
$27.00
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
Primo Primo Comet Recumbent Tire
$28.95
Primo Comets make great tires for recumbent riders looking for a value priced performance tire. * Lightweight * High Pressure * Low Rolling Resistance They are available in standard and Kevlar belted models. The Kevlar version has a reflective strip on the sidewall
TerraCycle TailSok Light Mount Kit
$29.00
This clever little mount lets you put one light out the back of your TerraCycle TailSok rear fairing, and another light INSIDE your sock to really really light things up! Lighting your sock from the inside really makes an attention-getting display. Designed to slide right on your TerraCycle TailSok Frame.
Page 1 of 5 Next page