Increase your visibility day and night! This simple, effective rubber clip snaps around your flag pole so you can attach a bicycle rear light. Works with any rear light designed to attach to a vertical tube. The rubber clip has a 1 inch (25.4mm) outer diameter compatible with almost any bicycle rear light designed to attach to a seat post or other vertical tube, is 1.25 inch tall with a 1/4 inch (6.35mm) inner diameter. For use with any flag pole from 6mm (just under 1/4 inch) up to 5/16 inch (8mm) in diameter. Light sold separately; note that if you use a RapidX2 Light, you don't need this piece.
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
This clever little mount lets you put one light out the back of your TerraCycle TailSok rear fairing, and another light INSIDE your sock to really really light things up! Lighting your sock from the inside really makes an attention-getting display. Designed to slide right on your TerraCycle TailSok Frame.
The FastBack Tool Pouch is for those couple of tubes, tire tools and cell phone that you never quite have a place to put. Fits nicely onto a FastBack 4.0 or M70 Hydration Pack, it can also be mounted directly onto some recumbent bikes, trikes and racks. The Tool Pouch is essentially a rectangle, with the top and bottom lengths at 102mm (4"), the sides at 216mm (8.5"), and a 51mm (2") depth. The clip-on strap is 178mm (7") long (51mm (2") of which is the clip). The Velcro straps reaching from the top are 114mm (4.5") and the ones from the bottom are 95mm (3.75"). Toss that camera in there and take a picture of yourself at the top of the mountain, riding farther, having more fun on your bike.
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
This pack can attach to the back of a recumbent seat if there is a horizontal bar available, as in the Sunseeker bikes and trikes and many Catrike models. A roomy pack measuring 8 inches tall, 11.5 wide, and 4 inches thick, you can carry your essentials and a little more, but is not designed for heavy cargo.
$55.00 - $65.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands on your recumbent trike? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters? This accessory mount is the one. This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp goes forward and inward a little bit and holds mounting tube that goes up and then out. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. Left or right hand installation. This mount is not for assistance in getting in and out of your trike.
These flags are superbly designed for both high performance and high style. The rakish aero shape is tuned for visibility, low drag, and just the right amount of attention getting back-and-forth waving. Highly visible under multiple lighting conditions and backgrounds, yet very stylish and something you can be proud to ride with. Made from highly weather and UV resistant outdoor polyester for long life and excellent resistance to fading. Poles are solid fiberglass, with two 36in (0.9m) long sections. Sections are joined by a special carbon fiber ferrule with a silicone rubber grip collar to keep things together until you want them apart. Flag is shaped for visual contrast, aerodynamics, and controlled flapping, even at high speeds. Reflective spine, accents and streamers enhance visibility.
The FastBack Carbon Slim Seatback Bag is the one stop shop for hard-shell recumbent bike seats. Are you going to ride until the sun sets? Toss a jacket in the Carbon Slim. Gonna work up an appetite climbing that mountain? Fill the Carbon Slim with GORP and energy bars and you're set. Forgot it's Mother's Day? Grab some chocolates and a card and make haste! Terracycle's SpiderGrip technology is reconfigurable to achieve an exact, secure fit every time. Once you form the pocket to the shape of your seat, you can take it off and put it back on without any trouble at all. The FastBack Carbon Slim Seatback Bag will let you take your goodies with you when you want to ride far and ride fast.
This versatile bag could hold a small pump, tools, spare tube, phone, wallet, and snack bar, and is designed to fit on tubes up to 70mm or so, including the main tubes on Bacchetta’s Carbon Aero. Made from waterproof materials and a waterproof zipper, the Fastback NorBack frame pack will keep your stuff dry in all but the very wettest conditions, and is built to last. Details: 14 inches (35mm) long, 5 inches (13cm) tall. There is one main pocket with a wide Velcro loop on the ceiling that is designed to hold a mini pump. There are two zipper pockets on the inside front. The top is reinforced with a removable stiffener to keep it in position on your bike. Compatible with nearly any bike or trike.
The Catrike Return Idler Kit Add-On is for Catrikes that already have a TerraCycle Power Idler. If your Catrike already has a TerraCycle Power Idler, this add-on is you need to optimize your chainline to reduce friction and noise. This kit comes with a Sport Return Idler (with nylon Sideplates and ABEC 7 Bearing), a longer stainless steel bolt, a Stainless Steel Chain Keeper and a Floating Chaintube Holder. Please call Basically Bicycles if you have questions about selecting or using this kit on your Catrike.
TerraCycle has developed this rack to attach your electric assist kit's valuable, heavy battery on your recumbent bike or trike: centered, low down, and out of the way. You'll hardly know it's there! Height and angle can be adjusted to fit just about any bike or trike on the market. The CNC machined mounting clamps precision made for the most common frame sizes. This battery mount is the super sturdy, elegant battery solution that the recumbent world has been waiting for. Contact us to order to assure proper fit for your bike/trike and battery.
$128.00 - $160.00
Looking to electrify your Catrike recumbent trike? This CNC machined battery mount allows you to mount a battery under the seat and close to the centerline of your Catrike, the best place to mount a battery. The mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The battery shelf is large and sturdy, and set up to hold the common batteries, like the BionX, that use standard bottle boss spacing. Additional plates to mount less common batteries like the BionX rear rack battery are also available. For other batteries in shrink wrap or nylon housings, you can usually strap them on or use zip ties. Precision made for Catrike recumbent trikes, this battery mount is the super sturdy, elegant battery solution that you need for your electric trike. On the folding Catrikes, the battery mount has to be on the right in order to work with the fold. Right side configurations include the optional extender to clear the chain. On the Villager, the extender is required for both sides. Recommended maximum battery weight is 15 lbs (6.8Kg).
This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The attaches your electric motor kit battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.
Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.
If more than one person rides your Catrike, then a Catrike Boom Adjust Chain Tensioner is perfect to eliminate the worries of whether the chain is too long or too short! TerraCycle's Catrike Boom Adjust Chain Tensioner allows you to move your boom without hassling with the chain. It automatically compensates for changes in chain length when you adjust the seat for different riders. Perfect for anyone that would like to share their Catrike with different riders. The installation is simple, design is sleek and materials are strong. All parts are black anodized CNC machined 6061 T6 Aluminum. All fasteners are stainless steel. The idlers are Delrin with 6mm sealed cartridge bearings. The front clamp is machined specifically for the Catrike boom tube, which is a special custom size. The length of the front arm is designed to cover the full range of boom adjustment. The idlers are high quality and have sealed cartridge ball bearings that will outlast the other parts of your drivetrain by several times.
Looking for handles to help you get on or off of your Catrike? These are the Assist Arms for you! The long, curving arms provide multiple gripping positions and provide a generous area to rest your wrists and arms. Centered over the front wheels, the arms are centered and extend forward so they are easy to reach when you are first getting on, and extend back towards you when you're seated to help you start to get up. Your grip is always natural and comfortable.
The best place to locate pannier loads on recumbent bikes is under the seat, and these TerraCycle underseat racks let you do just that. This position maintains stability and allows you to carry heavier loads with ease. You also have easier access to items that you need readily accessible. Made in the USA with high strength, lightweight 6061 aluminum, beautifully machined rack arms, tig welded pannier rails, stainless steel fittings, the racks work well for touring and commuting. The racks are designed to fit most panniers whose hooks are near the top. Many manufacturers are offering recumbent specific under seat panniers, making the selection even better. NOTE: This underseat rack does not generally work well with Ortlieb panniers. Around the block or around the world, a TerraCycle rack is one of the most useful accessories for your recumbent bike.
Use this bag on the handlebars, or on the frame or back of many recumbent bikes. Great for carrying your spare tube and tire levers, multi-tool, wallet, phone, or other small items. Works on recumbent bikes and trikes with exposes seat tubes, such as the Catrike Villager or the Sun EZ Sport. Product Info: Black • 150 cubic inches capacity Product Details: Formed Stiffener insert Water resistant 600 denier polyester Large reflective trim Easy to install with cinch straps Handlebar mount
Looking for a little extra cargo room on your commute or doing a little day tripping? Check out Sunlite's Bar Tender Handlebar Bag. It quickly and easily mounts to your bars and gives you one large main compartment and a front pocket to keep your gear organized. This thing is built for the real world with its waterproof material, reflective accents and a removable carrying strap so you can go from bike to office in one easy swoop.
Sun's Sun Seeker Eco Tad SX is Sun's most affordable tadpole trike.If you are looking for an entry-level tadpole-style recumbent trike with relatively higher seating, this is the one to try. It has a fully adjustable mesh-back seat with padding that keeps you cool and comfortable on long outings. There are spare bottle mounts seat frame to let you carry plenty of hydration for the long hauls. Wheel Base: 37-1/2 inches (95cm) Overall Length: 70-1/2 – 78-3/4 inches (179-199cm) Width: 31 inches (78.7cm) Seat Height: 17-18 inches (43-46cm) Weight: 46 lbs. Weight Limit: 300 lbs. X-Seam: TBD
The Sun Seeker Fat Tad CX is the most fun you’ll have this low to the ground, off-road. This bad boy is equipped with front and rear suspension, chromoly frame, plus 4-inch wide off-road tires! The Fat Tad will handle sand and gravel like no other trike out there. Shifting is smooth with SRAM drivetrain components and 3x8 gearing while reliable, all-weather braking is provided by the Promax mechanical disc brake up front. Other features include an aluminum seat frame, air-mesh padded seat, and provisions to mount four water bottle cages. - X-Seam range: 37 – 50.5 inches
Sun Seeker's X3-AX features 3 wheels so you enjoy a go-cart feel and don't even have to put a foot down at stops. Plus, its light aluminum frame has plenty of get-up-and-go and handles like a dream, while the long wheelbase means a stable, predictable ride at even maximum speed. Complementing the great frame are three 20-inch wheels with quality tires and dual rear disc brakes for total control. You'll also love the comfy, highly adjustable mesh seat and the easy ergonomic handlebar position. You get reliable Shimano, SRAM, and Promax components for braking and shifting excellence too.
Page 1 of 5 Next page