Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
This extender kit gives you 15mm of additional space to mount another accessory. Some folks want to run a small blinking white light alongside their main illumination light. In the rear facing configuration, this extender allows you to mount two accessories to the mount ie: computer and GPS, or computer and separate heart rate monitor. The possiblities are endless. The kit is composed of a 15mm add on mount, a fitted end cap, and a new longer stainless bolt. This kit allows you to add space to either or both sides of your existing accessory mount.
Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.
Plastic flag holder fits Catrike recumbent trikes and holds the flag securely in place while you ride.
This attaches to the end of the kingpost on an ICE recumbent trike, and allows the sensor to be easily positioned to pick up the magnet signal.
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
This accessory allows a bottle cage to be mounted facing the rider for easy removal of the bottle while riding. It fits nicely on the front frame of ICE recumbent trikes. Bottle and cage not included; not all cages fit on the riser.
Use this spacer grip on your 1 1/8 headset to mount a computer or light. Capacity : One item (Cycle computer or LED light) Material : Aluminum Alloy Feature : Can mount above or below the stem by adjusting the angle. Use instead of a 10mm thickness headset spacer Not recommended for heavier accessories (maximum: 250g)
Lightweight Bicycle accessory mount adapter fits int eh end of your handlebars for perfect accessory placement. Made of alloy and resin, it will hold accessories weighing up to 150 grams Dimensions: 25.4 (D) x 40 (L) mm Mount up to 23mm (inside diameter of handlebar)
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
Lightweight Accessory Holder * Holds up to 2 accessories (light, computer, bottle cage holder, etc) * Lightweight and rustproof alloy construction * New LW-Clamp reduces weight 25 grams comparing to previous model * Alloy bar is position adjustable * Hex wrench required for installation/removal Standard size clamp (22.2 – 28.6 mm diameter) If you are not sure if this will fit, let us know the make and model of your bike or trike, and where you plan to install it, and we'll advise.
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
- Securely holds iPhone 5, 6, 6s, 7, 7s, " Android Devices, and most smartphones with protective cases. Compatible with devices/cases up to: 6.0” (h) x 2.9” (w) x 0.625” (d) - Instant removal and installation of device - Rubber bumpers help grip and cushion device - Adjustable viewing angle can be set for preference - Handlebar mount, stem mount, and weatherproof touchscreen-friendly bag included - Not compatible with phones in heavy-duty box-style cases
The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, 7 Plus, 7s Plus, Android Devices, and most larger style smartphones with protective cases. Holds iPhone 6 in Otterbox cases. Compatible with devices/cases up to: 7.8” (h) x 3.5” (w) x 0.5” (d) Mounts on stem or handlebar Easy to insert and remove phone
Give yourself an easy view of computers and mirrors and other accessories for your recumbent trike with this mount made especially for Catrikes. Choose one for the left or right side of your recumbent trike, or order a pair. (Computer, mirrors and other accessories sold separately.)
The 5" x 9" Asymmetric T-Bar allows a full 5" for mounting possibilities. At 7/8" wide, most any accessory that fits handlebars will fit the T-Bar. 9" tall means that you have plenty of space to adjust and adapt your accessories to be as close or as far as you want them to be. The asymmetry allows greater flexibility for mounting items to the left or right. Consider a cockpit clamp to use with your T-bar.
The Hefty Holder is designed to securely hold the largest cases for all iPhones, Androids and others. Compatible with Otterbox, Lifeproof, and other devices/cases up to: MAX 6.9” (h) x 3.7” (w) x 0.7” (d) MIN 5.25" (h) x 3.25" (w) x 0.5" (d) Mounts on stem or handlebar Easy to install and remove phone
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
Use this light mount for either handlebar type lights or dynamo lights on ICE recumbent trikes with twin M5 bosses only (ICE Trikes from 2008 onwards). Light sold separately.
The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.)
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
$42.00 - $48.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands on your recumbent trike? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters? This accessory mount is the one. This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp goes forward and inward a little bit and holds mounting tube that goes up and then out. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. Left or right hand installation. This mount is not for assistance in getting in and out of your trike.
TerraCycle has developed this rack to attach your electric assist kit's valuable, heavy battery on your recumbent bike or trike: centered, low down, and out of the way. You'll hardly know it's there! Height and angle can be adjusted to fit just about any bike or trike on the market. The CNC machined mounting clamps precision made for the most common frame sizes. This battery mount is the super sturdy, elegant battery solution that the recumbent world has been waiting for. Contact us to order to assure proper fit for your bike/trike and battery.
$128.00 - $160.00
Looking to electrify your Catrike recumbent trike? This CNC machined battery mount allows you to mount a battery under the seat and close to the centerline of your Catrike, the best place to mount a battery. The mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The battery shelf is large and sturdy, and set up to hold the common batteries, like the BionX, that use standard bottle boss spacing. Additional plates to mount less common batteries like the BionX rear rack battery are also available. For other batteries in shrink wrap or nylon housings, you can usually strap them on or use zip ties. Precision made for Catrike recumbent trikes, this battery mount is the super sturdy, elegant battery solution that you need for your electric trike. On the folding Catrikes, the battery mount has to be on the right in order to work with the fold. Right side configurations include the optional extender to clear the chain. On the Villager, the extender is required for both sides. Recommended maximum battery weight is 15 lbs (6.8Kg).
This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The BionX option includes spacers specifically created for BionX batteries. The attaches your BionX battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.
Looking for handles to help you get on or off of your Catrike? These are the Assist Arms for you! The long, curving arms provide multiple gripping positions and provide a generous area to rest your wrists and arms. Centered over the front wheels, the arms are centered and extend forward so they are easy to reach when you are first getting on, and extend back towards you when you're seated to help you start to get up. Your grip is always natural and comfortable.
The best place to locate pannier loads on recumbent bikes is under the seat, and these TerraCycle underseat racks let you do just that. This position maintains stability and allows you to carry heavier loads with ease. You also have easier access to items that you need readily accessible. Made in the USA with high strength, lightweight 6061 aluminum, beautifully machined rack arms, tig welded pannier rails, stainless steel fittings, the racks work well for touring and commuting. The racks are designed to fit most panniers whose hooks are near the top. Many manufacturers are offering recumbent specific under seat panniers, making the selection even better. NOTE: This underseat rack does not generally work well with Ortlieb panniers. Around the block or around the world, a TerraCycle rack is one of the most useful accessories for your recumbent bike.
Page 1 of 1