These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
This extender kit gives you 15mm of additional space to mount another accessory. Some folks want to run a small blinking white light alongside their main illumination light. In the rear facing configuration, this extender allows you to mount two accessories to the mount ie: computer and GPS, or computer and separate heart rate monitor. The possiblities are endless. The kit is composed of a 15mm add on mount, a fitted end cap, and a new longer stainless bolt. This kit allows you to add space to either or both sides of your existing accessory mount.
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands on your recumbent trike? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters? This accessory mount is the one. This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp goes forward and inward a little bit and holds mounting tube that goes up and then out. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. Left or right hand installation. This mount is not for assistance in getting in and out of your trike.
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
$128.00 - $160.00
Looking to electrify your Catrike recumbent trike? This CNC machined battery mount allows you to mount a battery under the seat and close to the centerline of your Catrike, the best place to mount a battery. The mount consists of a heavy duty clamp that attach to the frame, an angle adjustable vertical plate that attaches to the frame clamp, and a battery shelf that attaches to the vertical plate. The battery shelf is large and sturdy, and set up to hold the common batteries, like the BionX, that use standard bottle boss spacing. Additional plates to mount less common batteries like the BionX rear rack battery are also available. For other batteries in shrink wrap or nylon housings, you can usually strap them on or use zip ties. Precision made for Catrike recumbent trikes, this battery mount is the super sturdy, elegant battery solution that you need for your electric trike. On the folding Catrikes, the battery mount has to be on the right in order to work with the fold. Right side configurations include the optional extender to clear the chain. On the Villager, the extender is required for both sides. Recommended maximum battery weight is 15 lbs (6.8Kg).
This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The attaches your electric motor kit battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.
This pack can attach to the back of a recumbent seat if there is a horizontal bar available, as in the Sunseeker bikes and trikes and many Catrike models. A roomy pack measuring 8 inches tall, 11.5 wide, and 4 inches thick, you can carry your essentials and a little more, but is not designed for heavy cargo.
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
This versatile bag could hold a small pump, tools, spare tube, phone, wallet, and snack bar, and is designed to fit on tubes up to 70mm or so, including the main tubes on Bacchetta’s Carbon Aero. Made from waterproof materials and a waterproof zipper, the Fastback NorBack frame pack will keep your stuff dry in all but the very wettest conditions, and is built to last. Details: 14 inches (35mm) long, 5 inches (13cm) tall. There is one main pocket with a wide Velcro loop on the ceiling that is designed to hold a mini pump. There are two zipper pockets on the inside front. The top is reinforced with a removable stiffener to keep it in position on your bike. Compatible with nearly any bike or trike.
$55.00 - $65.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
This clamp-on flag mount fits 1" diameter tubes, such as the cross bar on the back of ICE and Catrike recumbent trikes. Easy to install, it enables you to put your flag up higher on your recumbent trike for increased visibility on the road.
This attaches to the end of the kingpost on an ICE recumbent trike, and allows the sensor to be easily positioned to pick up the magnet signal.
$225.00 - $230.00
The ICE Ergo-Luxe seat cover is a super comfortable recumbent trike seat. Beautifully designed to provide the ultimate level of comfort and back support. Breathable fabrics maximise airflow, and ergonomic extra cushioning in the base and sides further enhance comfort. The tension in the back can be easily adjusted to suit the rider. Integral Sidepod mounts eliminate the need for over the seat Sidepod straps. Includes a handy weather-sealed pocket on top for small items such as keys and phones. Reflective side detailing keeps you safe at night. Seat cover only. Shown in the photo with frame for illustration purposes. Fits Adventure or Adventure HD seat frames from 2017 onwards (check for compatibility with your frame before ordering a retrofit). Can be purchased as a seat frame and cover pack also.
ICE's Ergo neck-rest is now wider and even more comfortable, and this padded replacement cover is designed to fit the existing mesh seat neck rest. Adjustable tension strap for fully customizable comfort and reflective detailing to keep you safe at night.
The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.) Fits 22.2 mm diameter tubes.
Helping Handles offer the extra assistance you may need to get on and off your trike by giving secure leverage for a smooth recline and easier rise. The Helping Handles clamp firmly onto to the cross-axle of your ICE trike (except VTX) without interfering with the steering or ride; once fitted they do not need to be removed. Made from lightweight anodised aluminium with laser etched detailing, Helping Handles look stylish as well as being practical and convenient.
This ICE Trikes Neck rest fits the mesh seat, and is fully adjustable for height, angle, and pad tension. Includes the removable cover. Once adjusted, the neck rest doubles as a handle for moving your trike. Will also fit other trikes with 1" seat tubes, such as Catrike models.
ICE Trikes Wrist Rests are designed to comfortably and stylishly support the rider's wrists. Ideal for long journeys on a recumbent trike and riders with limited grip or strength. Lightweight construction and adjustable, weighing only 70g each. Easy to fit, simply snap onto your handlebar and tighten. Fits all ICE recumbent trike models, except the VTX, and is compatible with other recumbent trikes with vertical 22.2 mm ø handlebars. Washable wrist pad. Sold as a pair, for both handlebars. Wrist Rest features include: • Incredible comfort & wrist support while riding • Adjustable and lightweight construction at only 70g each • Super easy to fit, simply snap onto your handlebar and tighten up • Fits all ICE trike models except the VTX and is compatible with other recumbent trikes with vertical 22.2 mm ø handlebars
Adjustable, padded and lightweight, this neck rest adds comfort to your Catrike recumbent trike, especially if your seat is reclined.
Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.
This is the patented new space neck rest. With its contemporary looks and light weight, the neck rest is the perfect up grade for your Catrike. It fits on the top seat bar of all Catrikes. Features: -Laser cut and CNC machined adjustable neck rest -Stainless Steel hardware -Close/Open cell bonded double foam -Alloy spacers -Stainless limiter -Alloy CNC machined, hinged, proprietary clamps -Nylon shim to avoid frame scratching
Arkel's Catrike Expedition Panniers are specifically made to fit Catrike's Expedition, Road and Speed recumbent trikes. These neat bags attach directly to your frame, no rack necessary! Arkel builds them in Sherbrooke, Canada from 600 denier polyester fabric with foam and high density polyethelene stiffeners for impressive durability. - See Bike Compatibility Chart for fitment details
Safely carry your laptop, extra clothing, lunch and important files on or off the bike. The exterior fabric is a mix of tough and durable 1000 Denier Cordura® nylon and Sunbrella® acrylic, a fabric used in awnings and boat covers. This elegant and super functional pannier will guard against and withstand whatever the road throws at you and will outlast any bag you've used in the past. Features: Arkel's cam lock attachment system--easy to use and keeps your bag on your rack until you take it off. Weather resistant. Inside completely lined with waterproof fabric. Built in laptop compartment that can hold up to 15” laptops. Internal backplate protects laptop against shocks on the bike and when set on the floor. Deluxe shoulder strap (color coordinated). 2 outside zippered pockets for easy storage and access to keys, wallet and cell phone. Reflective material on all sides. Lifetime warrantee Weight: 1.17g / 2.6 lbs (unit) Volume: 23 l. / 1400 cu. in. (unit) Dimensions: 17" x 6" x 12", with mounting hardware 14.5" from bottom
Arkel's ORCA 35 front or rear waterproof panniers are functional, durable, and most importantly, fun to use. Welded seam technology ensures that the bag will stay dry no matter the conditions and the patented Cam-Lock mounting system will keep the bags on the rack, regardless of the load you carry or the road conditions. No one else offers such a solid and reliable mounting system for bike panniers. Many smaller details make this bag unique, like an internal organizer for easy access to documents, maps, tablet, wallet, etc. This means you won’t have to empty half the bag to get to what you need. A plastic protector at the bottom backside of the pannier adds protection between the bag and the rack and will avoid any premature wear caused by friction against the rack. These panniers have D-rings for an optional shoulder strap which comes in handy when travelling at the airport or simply carrying your panniers around at the end of a long ride. - Weight: 1.86 kg / 4.1 lbs (pair) without removable internal cradle - 2.12kg / 4.6 lbs (pair) with removable internal cradle - Volume: 35 l. / 2140 cu. in. (pair)
No one can predict the weather with 100% accuracy, and on an extended tour you are sure to run into at least a little rain now and then. To keep your panniers and gear dry, rain covers are an indispensable accessory. Arkel makes them out of yellow ultra light 1.9 oz Silicon Coated Ripstop Nylon, so they are feather light and don't take up much room. An elasticized drawstring allows them to be adjusted to fit the load and piece of stretch micro mesh fabric at the bottom allows any water that gets inside to drain. Besides keeping your panniers dry, rain covers also help keep them clean. We all know that the grit and grime that we can pick up on wet roads is some of the hardest dirt to get out. It is also detrimental to the pannier fabric. Washable rain covers help your panniers look better and last longer. Sizes available to fit all Arkel panniers and the handlebar bag.
Arkel's Recumbent Seat Bag features durable Cordura construction and is loaded with great Arkel features such as a flag pole sleeve, water bladder pocket, and hose port hole. Plus, it has exterior compression straps to stabilize your gear and accommodate variable seat widths while dual carry handles let you tote it along on off-bike adventures, too.
The SIGNATURE H is a waterproof bike pannier (Horizontal briefcase style design) for urban bike travel. This pannier is made of 1000 denier Cordura® nylon lined with a waterproof TPU laminated fabric with fully taped seams. Tough, durable and waterproof, this pannier is equipped with Arkel's world renowned Cam-Lock® full aluminum attachment system. The SIGNATURE H will carry all of your essentials to work or school, day in and day out. This pannier is made in Canada and personally signed by its maker. • Lined with waterproof material with fully taped seams. • Padded laptop compartment • Zippered pocket inside for smaller items • Cam-Lock® mounting system • Padded mounting hardware cover for added comfort off the bike • Carry handle • Comfortable 2” shoulder strap • Offset shoulder strap attachment points for comfortable and balanced load • Multiple attachment points for shoulder strap - you can comfortably carry the bag fully opened for grocery shopping • Reflective patches for night safety • Shopping bag style carry handles accessible when the bag is fully open • Flat bottom allows the bag to stay upright • Waterproof liner is removable for washing
Page 1 of 1