$25.00 - $30.00
If the foam on the back of the seat cushion (upper) or the seat (lower) on your late-model Catrike Villager, Trail, Road, Dumont, or 559 needs replacement, this is what you want. Select either one part or both. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.
No one can predict the weather with 100% accuracy, and on an extended tour you are sure to run into at least a little rain now and then. To keep your panniers and gear dry, rain covers are an indispensable accessory. Arkel makes them out of yellow ultra light 1.9 oz Silicon Coated Ripstop Nylon, so they are feather light and don't take up much room. An elasticized drawstring allows them to be adjusted to fit the load and piece of stretch micro mesh fabric at the bottom allows any water that gets inside to drain. Besides keeping your panniers dry, rain covers also help keep them clean. We all know that the grit and grime that we can pick up on wet roads is some of the hardest dirt to get out. It is also detrimental to the pannier fabric. Washable rain covers help your panniers look better and last longer. Sizes available to fit all Arkel panniers and the handlebar bag.
This extender kit gives you 15mm of additional space to mount another accessory. Some folks want to run a small blinking white light alongside their main illumination light. In the rear facing configuration, this extender allows you to mount two accessories to the mount ie: computer and GPS, or computer and separate heart rate monitor. The possiblities are endless. The kit is composed of a 15mm add on mount, a fitted end cap, and a new longer stainless bolt. This kit allows you to add space to either or both sides of your existing accessory mount.
An elbow mount coupled with a double-ended cockpit clamp lets you install accessories on your recumbent bike or trike. The 90° Cockpit Mount Elbow Tube functions to change the direction of your mount from horizontal to vertical (or vice versa). The 7/8" width is an industry standard size, which makes for easy connecting or mounting. The compact length is long enough connect two clamps comfortably while still stylishly blending into the mounting system.
$59.00 - $69.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The attaches your electric motor kit battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.
These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).
Arkel's Catrike Expedition Panniers are specifically made to fit Catrike's Expedition, Road and Speed recumbent trikes. These neat bags attach directly to your frame, no rack necessary! Arkel builds them in Sherbrooke, Canada from 600 denier polyester fabric with foam and high density polyethelene stiffeners for impressive durability. - See Bike Compatibility Chart for fitment details
Adjustable, padded and lightweight, this neck rest adds comfort to your Catrike recumbent trike, especially if your seat is reclined.
Catrike-branded Velcro strap holds the brake lever closed or makes a stylish bracelet.
The SIGNATURE H is a waterproof bike pannier (Horizontal briefcase style design) for urban bike travel. This pannier is made of 1000 denier Cordura® nylon lined with a waterproof TPU laminated fabric with fully taped seams. Tough, durable and waterproof, this pannier is equipped with Arkel's world renowned Cam-Lock® full aluminum attachment system. The SIGNATURE H will carry all of your essentials to work or school, day in and day out. This pannier is made in Canada and personally signed by its maker. • Lined with waterproof material with fully taped seams. • Padded laptop compartment • Zippered pocket inside for smaller items • Cam-Lock® mounting system • Padded mounting hardware cover for added comfort off the bike • Carry handle • Comfortable 2” shoulder strap • Offset shoulder strap attachment points for comfortable and balanced load • Multiple attachment points for shoulder strap - you can comfortably carry the bag fully opened for grocery shopping • Reflective patches for night safety • Shopping bag style carry handles accessible when the bag is fully open • Flat bottom allows the bag to stay upright • Waterproof liner is removable for washing
Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.
Here's another help for attaching computers, lights and other goodies to your recumbent bike or trike. The 40mm Straight Link Tube can function as either an articulating joint or a mini mount all by itself. The 7/8" is an industry standard size, which makes for easy connecting or mounting. The compact 40mm length is long enough to hold a small mount and short enough that, when acting as an articulating joint, it stylishly blends into the mounting system. Specifications: 40mm long; made from 6061-T6 aluminum; powder coated black; Weight: 14 grams
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.
Safely carry your laptop, extra clothing, lunch and important files on or off the bike. The exterior fabric is a mix of tough and durable 1000 Denier Cordura® nylon and Sunbrella® acrylic, a fabric used in awnings and boat covers. This elegant and super functional pannier will guard against and withstand whatever the road throws at you and will outlast any bag you've used in the past. Features: Arkel's cam lock attachment system--easy to use and keeps your bag on your rack until you take it off. Weather resistant. Inside completely lined with waterproof fabric. Built in laptop compartment that can hold up to 15” laptops. Internal backplate protects laptop against shocks on the bike and when set on the floor. Deluxe shoulder strap (color coordinated). 2 outside zippered pockets for easy storage and access to keys, wallet and cell phone. Reflective material on all sides. Lifetime warrantee Weight: 1.17g / 2.6 lbs (unit) Volume: 23 l. / 1400 cu. in. (unit) Dimensions: 17" x 6" x 12", with mounting hardware 14.5" from bottom
This ICE Trikes Neck rest fits the mesh seat, and is fully adjustable for height, angle, and pad tension. Includes the removable cover. Once adjusted, the neck rest doubles as a handle for moving your trike. Will also fit other trikes with 1" seat tubes, such as Catrike models.
This attaches to the end of the kingpost on an ICE recumbent trike, and allows the sensor to be easily positioned to pick up the magnet signal.
Bacchetta's One Armed Bandit light mount puts your light out in front closer to the road so there is no more foot flash. Fits on 1 1/8" inch tubes, such as the front derailleur mast of Bacchetta models.
Adding an electric assist to your Catrike recumbent trike is easy with the e-Cat electric motor kit upgrade. In combination with a Catrike Dumont, 5.5.9, Expedition, Trail, Pocket or Villager, these systems offer excellent efficiency, comfort and riding enjoyment. The efficient and versatile Bosch Active Line Plus system features smooth, gentle acceleration, and four levels of assistance: Eco, Tour, Sport, and Turbo, with up to 270% assistance. The Bosch 400 Wh battery pack has a maximum range of 62 miles, and the easy-to-read display lets you know when it’s time to recharge. These kits are only available in the store; listing is for the electric motor kit only--trike sold separately.
TerraCycle's WINTR Fairing Kit can keep you riding even when the winds blow cold. WINTR stands for Weather-Inhibiting 'N Travel Ready. When the shelter provided by a time-tested Windwrap fairing combines with the easy to install and easy to transfer mounting hardware from T-Cycle, you have a system meticulously designed to keep you on the road no matter what the weather is doing. Utilizing the power of T-Cycle's exquisite CNC machining, the mounting hardware is stronger and simpler to use than ever before. The WINTR Fairing Kit includes a fairing along with all the mounting hardware needed to mount it to your bike or trike.
Arkel's Recumbent Seat Bag features durable Cordura construction and is loaded with great Arkel features such as a flag pole sleeve, water bladder pocket, and hose port hole. Plus, it has exterior compression straps to stabilize your gear and accommodate variable seat widths while dual carry handles let you tote it along on off-bike adventures, too.
The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.) Fits 22.2 mm diameter tubes.
This is a must if you plan to share your Catrike with other riders. Installing a Catrike chain tensioner will allow you to adjust the boom to fit multiple riders without adjusting the chain length each time.
SportCrafters trike trainers are specifically designed for recumbent trikes. Easy to use, lightweight and portable, SportCrafters trike trainers do not require any assembly or maintenance. The OverDrive Trike Trainer, powered by ARC Technology, automatically adjusts in resistance as the rider changes speed – no manual adjustment necessary. In higher speeds, the OverDrive Trike Trainer will ramp up the resistance to realistically mimic road riding conditions. This trainer is perfect for the active trike customer who wants to maintain fitness while riding indoors, and for households with multiple users at varying fitness levels, as the trainer functions with low to moderate resistance when it is turned around. For tadpole and one-wheel drive delta trikes - use one trainer (with a block for the second wheel, if necessary). For two-wheel drive delta trikes, we offer a pair of trainers: contact us for information. BEFORE YOU BUY be aware that you may experience slight fore-aft rocking, which is entirely dependent on how tightly you can lock your front brakes and how stiff your trike frame is. Unlike a clamping trainer, this trainer does not lock your trike in place. The vast majority of users don't mind the slight motion, and in fact you can use this gentle feedback to help develop a smoother cadence. Features and benefits: Change the resistance level simply by changing gears Resistance feels like riding on the road Lightweight, compact and easy to transport and store Accommodates 16" to 700c wheels Easy set-up requires no clamping on the rear skewer 100% designed and manufactured in Granger, Indiana, USA Lifetime warranty Specifications: Aluminum drums: 3.25" (82.5mm) diameter, 1/8" (3mm) wall thickness Drums are lathed on the axle for precision runout and balance All drums are dynamically spin balanced, and will not distort in heat or sunlight Bearings are greased and sealed, and do not require maintenance Steel framework is zinc-plated and powder coated for ultimate durability End caps: Molded polycarbonate Product dimensions: 21" x 4.25" x 10" (53.3cm x 10.8cm x 25.4cm) This product contains chemicals, including Acrylonitrile, Bisphenol-A and Methylene chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm Shipping for this product is $19.95.
This rack clamps onto a sideways tube on the back of a trike seat, keeping the cargo weight of your panniers low and central, forward of the suspension element on suspension trikes. The rack location preserves the go-cart-like handling that we all love about recumbent trikes. TerraCycle's Easy Trike rack features a quick-release that can be easily removed for travel and transport. Easy to install and remove and transfer from trike to trike. Easy to install and remove and transfer from trike to trike. Designed for Catikes with suspension, this rack can also be used on Catrikes without suspension, and may fit other trike brands--call us to confirm before ordering. Left and right racks are sold separately. Ride with just one side of the rack for short rides or commuting. Ride with both sides for longer rides, touring, or even grocery shopping. This rack is not suitable for top-mount rack trunks/bags.
This clamp-on flag mount fits 1" diameter tubes, such as the cross bar on the back of ICE and Catrike recumbent trikes. Easy to install, it enables you to put your flag up higher on your recumbent trike for increased visibility on the road.
If the mesh base of the seat on your late-model Catrike Villager, Trail, Road, Dumont, or 559 is damaged, this is the replacement. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.
If the outer cover of the seat cushion on your late-model Catrike Villager, Trail, Road, Dumont, or 559 is damaged, this is the replacement. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.
This is the Power Idler kit to seriously upgrade your stock sytem. Custom idler mounting brackets house a Terracycle Power Idler in Titanium cog. You won't believe how much smoother and quieter your bike will be until you install this kit and go for your first test ride. Note: On older bikes with the square seat channel, you may need to trim the excess length from the right side seat clamp L bracket. Since TerraCycle idlers are larger for greater efficiency, this raises the chainline and may produce rubbing of the chain on the right side L bracket unless it is shortened. Rad-Loc seat clamp bikes are OK.
$24.00 - $28.00
An essential building block in the Cockpit Mount family is the Double-Ended Cockpit Mount Clamp. The 7/8" to 7/8" clamp allows you to clamp to two 7/8" tubes, while the 1" to 7/8" clamp attaches to two tubes of different sizes. The open-ended, two-screw setup means that installation is a breeze, because you don't have to remove other things from your tube. The high surface area of the Double-Ended Cockpit Mount Clamp's grip securely clamps into place, holding any accessories or mounts wherever you want them to be. Not meant for use with steering controls. Use it with a cockpit elbow mount to install lights, computers, phone holders, and more on your recumbent bike or trike.
Page 1 of 2 Next page