Recumbent

These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. Terracycle made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt. Sold in pairs.

This extender kit gives you 15mm of additional space to mount another accessory. Some folks want to run a small blinking white light alongside their main illumination light. In the rear facing configuration, this extender allows you to mount two accessories to the mount ie: computer and GPS, or computer and separate heart rate monitor. The possiblities are endless. The kit is composed of a 15mm add on mount, a fitted end cap, and a new longer stainless bolt. This kit allows you to add space to either or both sides of your existing accessory mount.

These accessory mounts fit on the fixed side of the bar end shifter, and allow you to mount small accessories such as a cycle computer, thumb throttle, or motor controller button. Fits any bike or trike with Shimano, Microshift, or SRAM Bar End Shifters. Can be combined with the TerraCycle Handlebar Accessory Mount Clamps, which fit inside the long length Bar End Shifter Micro Mount. Short versions are 15mm (0.6in) long. Long versions are 30mm (1.2in) long. Both are 22.2mm (7/8in) outside diameter (the standard handlebar size). All are CNC machined 6061T6 aluminum, black anodized. The inside is hollowed out to 18.9mm (0.74in).

This TerraCycle made Battery Mount for Suspended ICE Trikes comes with a shelf drilled to allow the mounting of many different batteries. The attaches your electric motor kit battery to your ICE trike down low and out of the way. In fact, it lets you put the battery so out of the way that you can fold the trike with the battery attached! All parts machined from 6061-T6 aluminum and black anodized. All fasteners are stainless steel. Fits all ICE suspended trikes from 2011 onwards. Contact us about battery mounting options for other trikes.

Like all TerraCycle idlers, these will ensure trouble-free miles with less vibration and more power delivered to the drive train. The Catrike Dual Idler Kit is for Catrikes that didn't come with a TerraCycle idler. This kit essentially replaces your stock Catrike parts with high-end TerraCycle idlers. Depending on your boom setup, you can eliminate most if not all of your chain tube! The kit includes a Sport Power Idler, Return Idler, and a Stainless Single Chain Keeper, a Floating Chaintube Holder and all the hardware to make it run beautifully.

This pack can attach to the back of a recumbent seat if there is a horizontal bar available, as in the Sunseeker bikes and trikes and many Catrike models. A roomy pack measuring 8 inches tall, 11.5 wide, and 4 inches thick, you can carry your essentials and a little more, but is not designed for heavy cargo.

TerraCycle's WINTR Fairing Kit can keep you riding even when the winds blow cold. WINTR stands for Weather-Inhibiting 'N Travel Ready. When the shelter provided by a time-tested Windwrap fairing combines with the easy to install and easy to transfer mounting hardware from T-Cycle, you have a system meticulously designed to keep you on the road no matter what the weather is doing. Utilizing the power of T-Cycle's exquisite CNC machining, the mounting hardware is stronger and simpler to use than ever before. The WINTR Fairing Kit includes a fairing along with all the mounting hardware needed to mount it to your bike or trike.

The custom ICE recumbent trike mirror mount clamps onto the handlebar and positions the mirror below the brake lever. Necessary for fitting a mirror on an ICE Trike in combination with bar end shifters. (Mirror sold separately.) Fits 22.2 mm diameter tubes.

This is a must if you plan to share your Catrike with other riders. Installing a Catrike chain tensioner will allow you to adjust the boom to fit multiple riders without adjusting the chain length each time.

Designed for Catrikes with direct steering, this handy bracket makes installing a computer (to track your super speed!) a breeze. Powder coated in black, it's another quality item made in the USA by the good folks at Catrike.

Adding an electric assist to your Catrike recumbent trike is easy with the e-Cat electric motor kit upgrade. In combination with a Catrike Dumont, 5.5.9, Expedition, Trail, Pocket or Villager, these systems offer excellent efficiency, comfort and riding enjoyment. The efficient and versatile Bosch Active Line Plus system features smooth, gentle acceleration, and four levels of assistance: Eco, Tour, Sport, and Turbo, with up to 270% assistance. The Bosch 400 Wh battery pack has a maximum range of 62 miles, and the easy-to-read display lets you know when it’s time to recharge. These kits are only available in the store; listing is for the electric motor kit only--trike and installation sold separately.

If the foam on the back of the seat cushion (upper) or the seat (lower) on your late-model Catrike Villager, Trail, Road, Dumont, or 559 needs replacement, this is what you want. Select either one part or both. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.

If the mesh base of the seat on your late-model Catrike Villager, Trail, Road, Dumont, or 559 is damaged, this is the replacement. To make a whole seat, you need four items: a folding seat base mesh, folding seat foam cover, folding seat internal foam upper, and folding seat internal foam lower.