TerraCycle's WINTR Fairing Kit can keep you riding even when the winds blow cold. WINTR stands for Weather-Inhibiting 'N Travel Ready. When the shelter provided by a time-tested Windwrap fairing combines with the easy to install and easy to transfer mounting hardware from T-Cycle, you have a system meticulously designed to keep you on the road no matter what the weather is doing. Utilizing the power of T-Cycle's exquisite CNC machining, the mounting hardware is stronger and simpler to use than ever before. The WINTR Fairing Kit includes a fairing along with all the mounting hardware needed to mount it to your bike or trike.
For use with Shimano Steps electric bike systems This down tube battery features: Low profile Impact and vibration resistant Water proof Consistent recharge Capacity: 418 Wh (36V, 14Ah) Battery life: 1000 cycles
Adjustable, padded and lightweight, this neck rest adds comfort to your Catrike recumbent trike, especially if your seat is reclined.
ICE Trikes Wrist Rests are designed to comfortably and stylishly support the rider's wrists. Ideal for long journeys on a recumbent trike and riders with limited grip or strength. Lightweight construction and adjustable, weighing only 70g each. Easy to fit, simply snap onto your handlebar and tighten. Fits all ICE recumbent trike models, except the VTX, and is compatible with other recumbent trikes with vertical 22.2 mm ø handlebars. Washable wrist pad. Sold as a pair, for both handlebars. Wrist Rest features include: • Incredible comfort & wrist support while riding • Adjustable and lightweight construction at only 70g each • Super easy to fit, simply snap onto your handlebar and tighten up • Fits all ICE trike models except the VTX and is compatible with other recumbent trikes with vertical 22.2 mm ø handlebars
$59.00 - $69.00
This is a low profile CLAMP that attaches to your handlebars and an accessory mounting tube. The clamp can go almost anywhere- all it needs is 1/2 inch (12mm) of straight handlebar. The accessory mounting TUBE is available separately. The outside clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) tube. Only 1/2 inch (12.7mm) of open handlebar space is required. The inside clamp is designed to clamp to the inside of a 7/8 inch tube with a wall thickness of 0.065 to 0.049 inches (1.6 to 1.24mm). Most 7/8 tubing for bikes and trikes is in this range. This clamp is designed to be small and lightweight. It is not designed for heavy loads or to carry steering forces.
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands on your recumbent trike? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters? This accessory mount is the one. This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp goes forward and inward a little bit and holds mounting tube that goes up and then out. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. Left or right hand installation. This mount is not for assistance in getting in and out of your trike.
This mini T-bar plugs in and clamps on to the end of your handlebar and lets you mount a mirror or computer, rest your hands or give you a grip for mounting or dismounting your trike, and more. Fits into any handlebar that can take bar-end shifters (bars with 3/4 inch inside diameter, most bars are made this way). Double sided clamp grips the outside end of your handlebar and the vertical part of the T. Note: This will not work if you have bar-end shifters, since it mounts in the same place.
This versatile add-on will offer you additional space to put a light, phone holder, bike computer, or other goodie on your upright or recumbent bike or trike. Accessory Mounts are machined from 6061-T6 aluminum, then black anodized. All bolts are stainless steel. The arms can be independently rotated 360 degrees and locked in any position. The horizontal tube is 1 inch (25.4mm) diameter so nearly any bike accessory fits on it. The distance between the arms is 30mm, so if necessary, you can straddle a 1-1/8 (28.6mm) tube (a common mast and derailleur post size). When you order, let us know what size tubes you will attach it to, so that we can include the correct clamps.
ICE's Ergo neck-rest is now wider and even more comfortable, and this padded replacement cover is designed to fit the existing mesh seat neck rest. Adjustable tension strap for fully customizable comfort and reflective detailing to keep you safe at night.
Lightweight Accessory Holder * Holds up to 2 accessories (light, computer, bottle cage holder, etc) * Lightweight and rustproof alloy construction * New LW-Clamp reduces weight 25 grams comparing to previous model * Alloy bar is position adjustable * Hex wrench required for installation/removal Standard size clamp (22.2 – 28.6 mm diameter) If you are not sure if this will fit, let us know the make and model of your bike or trike, and where you plan to install it, and we'll advise.
Lightweight Bicycle accessory mount adapter fits int eh end of your handlebars for perfect accessory placement. Made of alloy and resin, it will hold accessories weighing up to 150 grams Dimensions: 25.4 (D) x 40 (L) mm Mount up to 23mm (inside diameter of handlebar)
This replacement pad fits on the brackets already installed on newer Catrike recumbent trikes. Need a set? Order two.
Page 1 of 1